Best Precision Sectional Warping Manufacturer In Madurai

$Lasertronic.png$

$Gemini_Generated_Image_aev07eaev07eaev0.webp$

$21.webp$

$22.webp$

$23.webp$

$13.webp$

High Speed Sectional Warping Machine

Pitch Measuring by Servo Control

SPECIAL FEATURES

SERVO CONTROL WARP TABLE

Crossing and warping combs are placed in a way that the thread run from the creel to the drum is as straight as possible, without unnecessary elbows not angles.
The warping comb can be placed very near to the drum, which causes a very exact conduction of the section width. When thickness of rolled yarn increases on the drum, the comb back up automatically and simultaneously with the advance and according to the inclination angle of the cone, so that the distance between comb and drum is kept constant from the beginning to the end of the section. When the section is over, machine moves automatically and places itself in the home position for beginning following section, according to previously chosen length & with an accuracy of 1/10 millimeter. The warping comb goes forward to initial position.

TOUCH SCREEN DISPLAY

All indication pilots placed in display box and in a semaphore visible from anywhere indicate the reason of drum stop: Thread breaking end or meters of length or any type failure notice like software, hardware and electrical.

DISC BRAKES

A hydraulic disc brake of special conception which absorbs the possible irregularities of brake drum makes, at the same time, quick & exact braking of warping drum & the obtaining of a regular tension of the warping during the beaming.

BEAM TENSION

Specialdesigne develop by Bobbler to produce perfect weaver beam to get optimum efficiency for automatic looms. Both pressure relief valve are separate for warping and beaming to get require bear tension control increase and decrease by manually of the yam sheet during beaming.

Separate Beaming Structure

This assembly is of very strong construction & suitable for the beaming of very heavy warpings.
The starting is carried out by a drive placed in both supports of the beam. Both beam supports can move easily separately or coupled, which allows an exact alignment of the beam on the warping.
Beaming speed without graduation until 120 mt/min.

SALIENT FEATURES

Robust Separate Warping & Beaming Structure.
Motorize movable beaming structure by push button.
Dynamically, Balanced metallic Solid Drum with Feed cone height
Fully serve system for precise warp table traverse motion, warp table cross motion & machine head stock motion in synchronization.
Use friendly operational panel having touch screen color display for all desired process data.
Effective air cooled caliper type hydraulic disc brake on both side of the drum with power failure device.

TECHNICAL SPECIFICATIONS

Technical Parameter	Specification
Working Width	1600 mm to 4000 mm
Beam Flange Diameter	800 mm to 1250 mm
Conical Angle	5° to 11°
Beaming Tension	Depends upon yarn count
Warping Speed	0 – 1000 mts/min
Beaming Speed	0 – 120 mts/min (higher on request)
Drum Circumference	2.5 mtr / 3 mtr